Operating Data Parameters; Menu Navigation - ABB ACH 500 Series Programming Manual

Using the Start-up Data
Menu
Operating Data
Parameters

Menu Navigation

ACH 500 Programming Manual
The Start-up Data Menu provides access to parameters that should be set at
start-up, and should not need to be changed. These parameters are Language,
Application Macro, and Motor Information. Refer to Chapter 3 – Start-up
Data for descriptions of each parameter.
To enter the Start-up Data menu:
1. Choose Operating Data Parameter 1 (Output Frequency).
2. Press and hold [ * ], then press [Right Arrow].
To change a parameter:
1. Use the [Up Arrow] or [Down Arrow] to select a value.
2. Press [ * ] to confirm the value and step to the next parameter.
3. Repeat Steps 1 and 2 for Parameters A through K.
To exit the Start-up Data menu, press [ * ] to confirm the value for the last
parameter, Parameter K. The program returns automatically to Operating Data
Parameter 1 (Output Frequency).
The Operating Data menu contains 20 data values, status information, and
three selection functions. There are eight additional Operating Data
parameters that display when certain applications are selected. The selection
functions are:
• Control Location Selection,
• External Reference Input Selection, and
• Parameter Lock locking/unlocking function.
Refer to Chapter 4 – Control Operation for a detailed discussion of the

Operating Data parameters.

The [Right Arrow] and [Left Arrow] keys are used to move between the
different levels (Operating Data, Main Level, Group Level, and Parameter
Level).
The [Up Arrow] and [Down Arrow] keys are used to step through the choices
within a level.
Chapter 2 – Overview of ACH 500 Programming
2-3