Settings; Overview Of Settings - Grundfos MAGNA3 50-40 F N Installation And Operating Instructions Manual

6. Settings

6.1 Overview of settings

All settings can be made on the pump control panel or with the Grundfos GO Remote.
Menu
Setpoint
Operating mode
Control mode
FLOW
LIMIT
Automatic Night Setback
Relay outputs
Setpoint influence
Bus communication
General settings
Submenu
• Normal
• Stop
• Min.
• Max.
• AUTO
ADAPT
• FLOW
ADAPT
• Prop. press.
• Const. press.
• Const. temp.
• Constant curve
• Set FLOWLIMIT
• Not active
• Active
• Relay output 1
• Relay output 2
• External setpoint function
• Temperature influence
• Pump number
• Language
• Set date and time
• Units
• Enable/disable settings
• Delete history
• Define Home display
• Display brightness
• Return to factory settings
• Run start-up guide
Further information
Setpoint
See section 12.1 .
Operating mode
See section 12.2
Control mode
See section 12.3
See section 12.3.1 AUTO
ADAPT
See section 12.3.2 FLOW
ADAPT
See section 12.3.3 Proportional pressure.
See section 12.3.4 Constant pressure.
See section 12.3.5 Constant temperature.
See section 12.3.6 Constant curve.
See section 12.4 FLOW .
LIMIT
Automatic Night Setback
See section 12.5
Relay outputs
See section 12.6
Setpoint influence
See section 12.7
External setpoint function
See section 12.7.1
Temperature influence
See section 12.7.2
Bus communication
See section 12.8
Pump number
See section 12.8.1
General settings
See section 12.9
Language
See section 12.9.1 .
Set date and time
See section 12.9.2
Units
See section 12.9.3 .
Enable/disable settings
See section 12.9.4
Delete history
See section 12.9.5
Define Home display
See section 12.9.6
Display brightness
See section 12.9.7
Return to factory settings
See section 12.9.8
Run start-up guide
See section 12.9.9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19