Checking The Ink Volume; Uninstalling And Installing The Handset And Handset Cradle (Mfc-685Cw Only) - Brother MFC-685CW User Manual

f
Do one of the following:
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
g
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
h
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
i
Press Stop/Exit.

Checking the ink volume

Although an ink volume icon appears on the
LCD, you can use the Ink key to see a large
graph showing the ink that is left in each
cartridge.
a
Press Ink.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh
Software User's Guide on the CD-ROM.)
Troubleshooting and Routine Maintenance
Uninstalling and installing the
handset and handset cradle
(MFC-685CW only)
If you do not use the handset you can remove
the handset and handset cradle.
Uninstalling the handset and handset
cradle
a
Unplug the curled handset cord from the
machine.
B
b
Pull the tab (1) back and hold it in
position as you push the cradle (2) to the
back of the machine.
®
or
®
in the
1
2
B
B
B
153