How To Use; Maintenance - Vacmaster VP321 User Manual

Vacuum Pump Maintenance
1. Run vacuum process a couple of times to "warm up" the oil.
2. Turn off machine and unplug to prevent electrocution.
3. Locate the drain & fill plugs on the side of the unit.
4. Locate drain bolt on underneath side of vacuum pump.
5. For access and ease of draining the
oil, position machine so the drain
bolt is "clear" and the dirty oil can
be captured.
6. Oil will flow immediately when
bolt is removed. Place catch cup
underneath before removing drain
bolt.
7. Capture oil from pump. When oil
is completely drained, replace and
tighten bolt. (Dispose of old oil
properly, according to your local
and state regulations.)
8. Follow the
Pump"
manual. Do not use machine until
oil has been added.
Vacuum Pump Maintenance
The VP321 vacuum pump requires periodic oil changes. Required oil change
schedule:
▫ First oil change: after 25 hours of VP321 usage.
▫ Future oil changes: change oil after every 60 hours of machine usage.
Using pump site glass, check the oil level and color frequently.
▫ Oil must remain between
▫ With use, the pump oil will become cloudy, dark or even "milky". Once oil
becomes discolored, change oil replacing with new VacMaster
8
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | www.VacMasterFresh.com | 800-821-7849

How to Use

"Adding Oil to Vacuum
instructions at beginning of
1
/
2
and of site glass.
3
/
4
VP321 Chamber Vacuum Sealer | User Guide
® vacuum oil.