Troubleshooting; The Unit Will Not Turn On; The Unit Does Not Pull A Complete Vacuum With Pouch; Vacuum Pouch Loses Vacuum After Being Sealed - Vacmaster VP321 User Manual

VP321 will not turn on -
▫
Make sure the machine is properly plugged into a grounded outlet.
▫
Check the power cord for tears and frays. Do not use this machine if
the power cord is damaged.
▫
Make sure the power switch is turned on. The LED screen will be
illuminated when on.
▫
If you see 'F1' displayed on the LED screen and the machine will not
function, make sure the lid is open and turn the power off. Turn the
machine back on and it should return to working order.
VP321 does not pull a complete vacuum with pouch -
▫
The vacuum time may not be set high enough. Set the vacuum time
higher and vacuum again.
▫
To vacuum and seal properly, the opening of the pouch must be
within the vacuum chamber. For detailed instructions, refer to "How
To Use the VacMaster® VP321 Chamber Vacuum Sealer".
▫
The seal bar, lid gasket and vacuum pouch need to be clean, dry and
free of debris for the vacuum process to be successful. Wipe surface
of the seal bar, lid gasket and the inside of the pouch and try again.

Vacuum pouch loses vacuum after being sealed -

▫
Sharp items can poke small holes in pouches. To prevent this,
cover sharp edges with a paper towel or VacMaster" Bone Guard and
vacuum in a new pouch.
▫
Some fruits and vegetables can release gases (out-gassing) if not
properly blanched or frozen before packaging. Open the pouch. If you
think food spoilage has begun, discard the food. If food spoilage has
not yet begun, consume immediately. If in doubt, discard the food.
VP321 is not sealing pouch properly -
▫
The seal time may not be long enough. Increase the seal time and try
again.
▫
Pouches will not seal if any moisture, food particles or debris are
present in the seal area. Wipe the inside of the pouch clean and
try again.
▫
Pouches must be properly placed along the seal bar. Make sure the
entire pouch is over the seal bar and there are no wrinkles in the
pouch material.
If problems persist, contact customer support at
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | www.VacMasterFresh.com | 800-821-7849

Troubleshooting

(800) 821-7849
for further assistance.
VP321 Chamber Vacuum Sealer | User Guide
13