Exploded View and Parts List _________________________________________________ 10 Thank you for purchasing this Vacmaster® wet/dry vacuum cleaner. Feel confident that with Vacmaster® you are obtaining a high quality product engineered for optimal performance. This vacuum is capable of picking up liquids and dry materials.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Vacmaster® takes pride in producing a high quality, durable product. This • Do not run Wet/Dry Vac over cord.
Foam Sleeve Filter __________________________ • Don’t use the appliance without a dust bag (an exception is wet vacuuming). Make Air Control Handle __________________________ sure that the dust bag is inserted into the appliance correctly. Rear Wheels _______________________________ • When using the appliance, make sure that no hair, clothing, or members are drawn Hub Caps _________________________________ ‘R’...
installed. If cartridge filter is not installed, refer to page 8 for filter installation. (fig.8&fig.9)The PET cartridge filter fit for wet & dry vacuum cleaning. 8. Put the PRE cloth filter over the filter tray with the attached PET cartridge filter. (fig.10) 9.
HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS. WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET. MAKE SURE WITCHING ON/OFF PLUG IS DISCONNECTED BEFORE CHANGING AND CLEANING FILTERS. 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2.
the container is clean and free from dust and dirt. 2. Remove collection bag & cartridge filter, then carefully install the foam sleeve filter over the filter cage and place the power head back on the container. (fig. 2) See filter installing instructions on page 9.
AINTENANCE NSTALLING & CLEANING CARTRIDGE FILTERS Installing Cartridge Filter WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET. MAKE SURE 1. Verify that the power cord is disconnected from the outlet. (fi g.1) PLUG IS DISCONNECTED BEFORE CHANGING AND CLEANING FILTERS. 2.
Cleaning Foam Sleeve Filter 1. With the removed power head in the upside down position, carefully remove foam ROUBLESHOOTING sleeve fi lter. (fi g. 3) 2. Use a mild soap and water solution to wash foam sleeve fi lter and rinse with clean water.
VK1520SIWC Manual Parts List ARTS LIST -EXPLODED VIEW Key Number Drawing Number Description Quantity VK01SR.10.05 Handle VK20SR.10.00 Power Head Assembly FV9563.02.00 Cartridge Filter FV9546.01.20.00 Filter Retainer TVQTDK.12.00 Latch Assembly TVQTXK.05.01 Vacuum Port Deflector TVQTXK.05.02 Vacuum Port Assembly VK21SR.22.00 Base VB07SR.00.02 Wheel Shaft TVQTJL.23.00...
Page 11
FV9612.01.00.01 Dust Bag F V9503.02.00 Foam Sleeve Filter FV8322.02.00 Air Control Handle FV8943.01.00 2 Coated Tube...
Need help?
Do you have a question about the VK1520SIWC and is the answer not in the manual?
Questions and answers