Adding Oil To Vacuum Pump; Side Of Cabinet Housing - Vacmaster VP321 User Manual

Read and complete the following to prevent any damage.
Oil must be added to the vacuum pump before using.
VacMaster
For shipping purposes there is no oil in the pump. Oil must be added.

Adding Oil to Vacuum Pump

Turn off and unplug machine to prevent electrocution.
1. Using the included ARY approved oil, fill the enclosed plastic oil bottle.
Locate the oil fill bolt (A) on the top of the vacuum pump.
2.
3. Remove oil fill bolt.
Watching oil site glass (B) insert end of oil bottle into hole.
4.
5. Fill oil level between 1/2 to 3/4 of site glass.
Do not overfill. Overfill can cause damage to the vacuum pump.
6. Replace and tighten bolt to vacuum pump.
NOTE: Pump requires approximately 8 fluid ounces of oil (approx. 1 cup)
Use only approved VacMaster
Side of Cabinet
A. Oil Fill Bolt
B. Oil Site Glass
4
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | www.VacMasterFresh.com | 800-821-7849
Stop!
®
model VP321 uses an oil vacuum pump.
Housing
VP321 Chamber Vacuum Sealer | User Guide
®
vacuum oil.
.