Using Remote Codes - Brother MFC-230C User Manual

Chapter 7

Using remote codes

Fax Receive Code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialing the Fax Receive Code
l 5 1. Wait for the chirping sounds then
replace the handset. See Easy
Receive on page 32. Your caller will have to
press Start to send the fax.
Telephone Answer Code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
pseudo/double-ring ring after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T ring off by
pressing # 5 1 (make sure you press this
between the rings).
42
Changing the remote codes
7
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
7
own codes.
a
Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b
Press a or b to choose On (or Off).
Press OK.
7
c
Enter the new Fax Receive Code.
Press OK.
d
Enter the new Telephone Answer Code.
Press OK.
e
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as ### and 999).
• Remote Codes might not work with some
telephone systems.
7