Brother MFC-230C User Manual page 103

Copying Difficulties
Difficulty
Cannot make a copy
Vertical streaks appear in copies
Scanning Difficulties
Difficulty
TWAIN/WIA errors appear when
starting to scan.
Software Difficulties
Difficulty
Cannot install software or print
'Device Busy'
PhotoCapture Center
Difficulty
Removable Disk does not work
properly.
Cannot access Removable Disk
from Desktop icon.
Suggestions
Make sure that the Copy
mode on page 50.)
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner on page 97.)
Suggestions
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
PaperPort™ 11SE with OCR, click File, Scan and choose the Brother
TWAIN/WIA driver.
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
®
Difficulties
Suggestions
1 Have you installed the Windows
1) Unplug the USB cable.
2) Install the Windows
Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup
Guide.)
Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the USB Flash memory drive and put it back in again.
3 If you have tried 'Eject' from within Windows
drive before you continue.
4 If an error message appears when you try to eject the USB Flash memory
drive, it means the card is being accessed. Wait a while and then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure that you have correctly inserted the USB Flash memory drive.
Troubleshooting and Routine Maintenance
key is illuminated. (See Entering Copy
®
2000 update? If not, do the following:
®
2000 update using one of the following methods.
®
, take out the USB Flash memory
B
87