Brother MFC MFC-7840W User Manual page 26

Chapter 2
Note
• Put the paper into the manual feed slot
with the side to be printed face up.
• Make sure that the print media (paper,
transparency and so on) is straight and in
the proper position on the manual feed
slot. If it is not, the paper or the
transparency may not be fed properly,
resulting in a skewed printout or a paper
jam.
• Do not put more than one sheet of paper
in the manual feed slot at any one time, as
it may cause a jam.
• If you put any print media in the manual
feed slot before the machine is in the
Ready state, the print media may be
ejected without being printed on.
• To easily remove a small printout from the
output tray, lift up the scanner cover by
using both hands as shown in the
illustration.
• You can still use the machine while the
scanner cover is up. To close the scanner
cover, push it down with both hands.
12