Water Connections - Riello STEEL PRO POWER Installation, Technical Assistance Service And System Management Manual

Hide thumbs

Table Of Contents

Table of Contents

INSTALLATION

Do not remove the cardboard packaging until your reach the

installation location.

Before handling the appliance and removing the packaging,

wear PPE and use tools suitable for the appliance's size and

weight.

This step must be carried out by several individuals equipped

with suitable means with respect to the appliance's size.

Make sure that the load is not unbalanced during handling.

Proceed as follows to remove the packing:

− Remove the straps (1) that fix the packaging to the pallet

− Remove the box (2)

− Remove the protective bag (3)

Do not dispose of packaging material into the environment,

or leave it within the reach of children, since it can become

a potential hazard. Dispose of packaging material in com-

pliance with applicable legislation.

To remove the module from the pallet proceed as follows:

− Unscrew the screws (4) of the four stops (5) that fix the

feet (6)

− To separate the pallet (7) from the module insert it as

shown in the figure (always pushing from the front).

Once the module is positioned, level it by using the appropriate

adjustments of the feet with a 14-key, as shown in the figure.

2.6