Tool And Accessories - American Sanders Legend Operator's Manual

EN
Tools
1. Wrench-Paper Clamp Open End 7/16 & 9/16 (59810A)
2. Wrench – Open End 15/16 & 3/4 (60498A)
3. Hex Wrench "T" Handle 3/32 (51273A)
4. Hex Wrench right angle 7/32 (51274A)
5. Hex Wrench right angle 3/16 (AS036600)
Accessories - Stair climber
1. Remove the motor from the chassis. See "Transporting the
Machine" (p.9).
2. Make sure transport dolly is in the "UP" stored position or removed.
See "Attaching and deploying transport dolly" (p.8).
3. Align key slot holes on the stair climber to the front attachment
points on the chassis and slide until latched. Note orientation in
figure. (See figure 25)
4. Place foot in front of front wheel of stair climber.
5. Using the operator's handle of the machine, lift and rotate the
machine over the stair climber. (See figures 26 and 27)
CAUTION: Use proper lifting techniques and keep firm grip
of chassis.
6. Transport machine to stairs, curb, or other raised area.
7. Pull chassis up stairs using the operator's handle.
Note: Use proper lifting techniques. (See figure 28)
To lower the chassis from the stair sander:
1. Place foot in front of front wheel of stair climber. (See figure 29)
2. Rotate chassis slowly back over onto its wheels. (See figure 30)
Accessories - Motor Dolly
The motor can be transported with the stair climber in combination with the
motor dolly.
1. Remove motor from chassis. See "Transporting the Machine" (p.9).
2. With motor on the ground, rotate motor until wooden motor handle
is touching the ground. (See figure 31)
3. Attach motor dolly to the stair climber by lining up the keyhole slots
on the motor dolly to the connection points on the stair climber and
slide until latched. (See figure 32)
4. Slide the motor dolly lip under the motor mount bar while aligning
the edges of the motor dolly to the edges of the motor mount bar.
(See figure 33)
5. Pull back on the handle of the motor dolly until the wheels are on
the floor and transport the motor where needed.
CAUTION: Use proper lifting techniques and keep firm grip of
motor dolly handle.
6. Pull motor up stairs using the motor dolly handle. Note: Use proper
lifting techniques. (See figure 34)

Tool and Accessories

Figure 29
13
Figure 30
Figure 31
Figure 32
Figure 33
Figure 34