Download Print this page
American Sanders OBS-18 Operator Safety Instructions

American Sanders OBS-18 Operator Safety Instructions

Hide thumbs Also See for OBS-18:

Advertisement

Quick Links

OPERATOR SAFETY INSTRUCTIONS

DANGER means:
WARNING means:
CAUTION means:
DANGER:
Failure to read the Owner's Manual prior to operating or servicing your Clarke American Sanders
machine could result in injury to you or to other personnel; damage to the machine or to other
property could occur as well. You must have training in the operation of this machine before
using it. If you or your operator(s) cannot read English, have this manual explained fully
before attempting to operate this machine.
DANGER:
Sanding/finishing wood floors can create an explosive or combustible environment. Do not
operate this machine around solvents, thinners, alcohol, fuels, floor finishes, wood dust or any
other flammable materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of
ignition should be extinguished or avoided.
Dust generated from sanding wood floors can spontaneously ignite or explode. Promptly dispose
of any sanding dust in a metal container clear of any combustibles. Do not dispose in a fire.
DANGER: •
Electrocution could occur if the machine is being serviced while the machine is connected to a power
source. Disconnect the power supply before servicing.
Electrocution or fire could occur if the machine is being operated with a damaged power cord. Keep
the power cord clear of the pad. Always lift the cord over the machine. Do not move the machine
by the power cord.
Shock hazard. Do not use the machine if it has been rained on or sprayed with water.
DANGER:
To avoid injury keep hands, feet, and loose clothing away from all moving parts on the machine.
Disconnect the power cord before replacing the pad, changing the abrasive, or when servicing. Do
not operate the machine unless all guards are in place. Never leave the machine unattended while
connected to a power source.
WARNING:
Injury can occur if protective clothing or equipment is not used while sanding. Always wear safety
goggles, protective clothing, and dust mask while sanding.
WARNING:
This sander is not to be used on pressure treated wood. Some pressure treated woods contain
arsenic and sanding pressure treated wood produces hazardous dust. Inhaling hazardous dust
from pressure treated wood can cause serious injury or death. Sanding pressure treated wood
decks or uneven surfaces can damage the sander which is not covered under warranty or damage
waiver.
WARNING:
Any alterations of modifications of this machine could result in damage to the machine or injury to
the operator or other bystanders. Alterations or modifications not authorized by the manufacturer
voids any and all warranties and liabilities.
Clarke
®
American Sanders
Severe bodily injury or death can occur to you or other personnel if the DAN-
GER statements found on this machine or in this Owner's Manual are ignored
or are not adhered to. Read and observe all DANGER statements found in
this Owner's Manual and on your machine.
Injury can occur to you or to other personnel if the WARNING statements
found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all WARNING statements found in this Owner's
Manual and on your machine.
Damage can occur to the machine or to other property if the CAUTION
statements found on your machine or in this Owner's Manual are ignored or are
not adhered to. Read and observe all CAUTION statements found in this
Owner's Manual and on your machine.
Operator's Manual (EN) - OBS-18/18DC
ENGLISH
Keep work area well ventilated.
EN
- 3 -

Advertisement

loading

Summary of Contents for American Sanders OBS-18

  • Page 1: Operator Safety Instructions

    Owner's Manual and on your machine. DANGER: Failure to read the Owner's Manual prior to operating or servicing your Clarke American Sanders machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
  • Page 2: Introduction & Machine Specifications

    Introduction & Machine Specifications The OBS-18 or OBS-18DC can be used on a variety of surfaces. It is an ideal tool for wood flooring maintenance and restoration work. It is also suitable for cleaning hard surfaces such as tile or Terrazzo.
  • Page 3: Machine Setup

    WARNING: Never put yourself or let others be in a position to get injured if the machine should tip or fall, while replacing the pad or changing abrasive. Clarke ® American Sanders Operator's Manual (EN) - OBS-18/18DC - 5 -...
  • Page 4 4. To empty the dust bag, unzip the disposal flap and force contents out by inverting the bag. NOTE: For best results, empty frequently. Follow all warnings posted in this manual and on the dust bag. Clarke ® American Sanders Operator's Manual (EN) - OBS-18/18DC...
  • Page 5 CAUTION: To prevent damage to the flooring and to reduce swirling, keep the machine in motion while the motor is running. NOTE: For sanding cuts and sandpaper, see page 9. Figure # 6 Clarke ® American Sanders Operator's Manual (EN) - OBS-18/18DC - 7 -...
  • Page 6: Troubleshooting

    Locate power source closer to work site. Have voltage checked by a qualifed electrician. Bad connection. Contact an authorized Clarke American Sanders Dealer. Defective motor. Contact an authorized Clarke American Sanders Dealer. Clarke ® American Sanders Operator's Manual (EN) - OBS-18/18DC...
  • Page 7: Sanding Cuts And Sandpaper

    For leveling after initial finish coat. 150 grit For scratching surface between coats of finish 945964/20 screen mesh 180 grit For surface roughing between coats of finish. screen mesh Clarke ® American Sanders Operator's Manual (EN) - OBS-18/18DC - 9 -...

This manual is also suitable for:

Obs-18dc