Installation - Rexing V1P Max Quick Start Manual

4. Installation

Step 1: Install the Dash Cam
Place the 3M tape on the Mount and properly orient the
Mount square to the roof and hood line of the vehicle.
Important! Ensure the T-interlock on the Mount is oriented in
the correct direction.
Firmly press the Mount onto the windshield. Wait at least 20
minutes before mounting the camera.
On the illustration Orient the mount as shown.
Step 2: Insert the Memory Card
The Rexing V1P Max accepts [Class 10/UHS-1 or higher]
Micro SD memory cards up to 256GB. You will need to
insert a memory card before you can begin recording. Before
inserting or removing a memory card,
you've powered down
memory card in until you hear a click, and allow the spring
release to push the card out.
8
Orient the
mount as shown
the device.
Press the Power
button to turn the
the power off
first ensure
Gently push the