Page 2
® Thank you for purchasing this Health o meter Professional product. Please read these instructions carefully and keep it for easy reference or training. Notes: - Ensure that the scale is off during the height rod mounting process. If the scale was powered on during the process, be sure to turn the scale off and power on again before weighing the first patient.
Page 3
Place the BABYHR onto the support rod aligning the two holes at each end. Ensure the end of the height rod with the measuring starting point is on the left side. Obtain the two flat head screws from the packaging and insert them through the height rod into the support rod.
Page 4
The original purchaser of the product must have proof of purchase to receive warranty service. Please save your invoice or receipt. Pelstar dealers or retail stores selling Pelstar products do not have the right to alter, or modify or any way change the terms and conditions of this warranty.
Need help?
Do you have a question about the Health o meter Professional 553KL-HR and is the answer not in the manual?
Questions and answers