Futech MULTIPOWER 3.6 COMPACT Quick Manual page 10

because the contacts are re-
cessed deep in the outlets.
Do not measure AC voltag-
es if a motor on the circuit is
being switched ON or OFF.
Large voltage surges may
occur that can damage the
meter.
∙ Set the function switch to the
V~/Hz/% position
∙ Insert the black test lead ba-
nana plug into the negative
COM-jack, the red test lead
banana plug into the positive
V-jack.
∙ Touch the black test probe tip
to the neutral side of the cir-
cuit, the red test probe tip to
the "hot" side.
∙ Read the voltage in the display
∙ Press the MODE button to in-