Advertisement
Quick Links
Advertisement
Related Manuals for Futech MULTICROSS 3
Summary of Contents for Futech MULTICROSS 3
- Page 1 MULTICROSS 3 / MULTICROSS 5 MANUAL 031.03 / 033.03 / 048.03 031.05 / 033.05...
- Page 2 Congratulations! On choosing this FUTECH instrument. FUTECH provides measuring instruments of precision and quality. Contributions from professional end users enable us to offer innovative, easy-to-use equipment. MULTICROSS 3 SUPER VISION / MULTICROSS 5 SUPER VISION MULTICROSS 3 DOTTED LINES / MULTICROSS 5 DOTTED LINES Professional cross-line laser with ultra visible laser beams due to the use of powerful laser diodes.
- Page 3 MULTICROSS 3 / MULTICROSS 5 MANUAL Case Horizontal laserexit (MC3/MC5) Vertical laserexit (MC3/MC5) Vertical laserexit (only MC5) Control panel On-/Off-button / Pendulumlock Fine adjustment Battery compartment Plumb beam (bottom) Adjustable feet Control panel 10. Horizontal laserlines 11. Vertical laserlines 12. Receivermode...
- Page 4 First use Remove any protective films where applied. Open the battery compartment and ins- ert batteries, please taking care to observe the indicated polarity. Turn the transportation lock (3) to the “ON” position. The pendulum levelling mecha- nism is released, and the instrument is able to align itself on its own. Make sure that the instrument is not on too much of a slope (within 3°).
- Page 5 MULTICROSS 3 / MULTICROSS 5 MANUAL Vertical alignment MULTICROSS 3 After disengagement of the pendulum locking system, and provided the instrument is within its levelling range, you can activate or deactivate the horizontal lines using the “V”-button (11). Press the number of times this button to get the desired number of laser lines.
- Page 6 To use the laser receiver mode, press the “receiver” button (12). The LED next to the receiver icon lights up and the unit can now be used with receiver. Attention: ∙ Receiver not always included. A list of compatible receivers can be found at www.futech-tools.com.
-
Page 7: Limits Of Use
∙ Use of products with obviously recog- in hazardous areas, or in close proximity ∙ To inform FUTECH immediately if the nizable damages or defects. to electrical installations or similar sit- product and the application becomes ∙... - Page 8 HAZARDS OF USE by lightning. international rules and regulations are WARNINGS ∙ Do not use the product in a thunder- observed. Before transportation or ∙ The person responsible for the product storm. shipping contact your local passenger must ensure that it is used in accord- ∙...
-
Page 9: Laser Classification
MULTICROSS 3 / MULTICROSS 5 MANUAL ACCURACY CONTROL environmental contamination. ∙ special warning signs in the laser By disposing of the product irrespon- working area Monitor horizontal levelling sibly you may enable unauthorized if used and operated as defined in this user ∙... -
Page 11: Technical Specifications
MULTICROSS 3 / MULTICROSS 5 MANUAL TECHNICAL SPECIFICATIONS If your instrument does not reach the re- quired tolerance, it should be returned 031.03 033.03 to your service centre or to your reseller 031.05 033.05 048.03 for service. Repairs carried out by unau- accuracy ±... - Page 12 JOIN US Facebook @futechtools LinkedIn futech-tools World Wide Web futech-tools.com...
Need help?
Do you have a question about the MULTICROSS 3 and is the answer not in the manual?
Questions and answers