Maintenance; Cleaning; Service; Lubrication - Heiniger EVO/H Translation Of The Original Instructions

NOTE!
Connecting the shearing plant to the power supply, the motor
is not yet engaged. The shearing plant is switched on and off
respectively via the cord / lever (Diag. 6, pos. c). The drive is
switched on by means of one downward pull, and is switched off
again by repeating this operation.
Should the power supply be interrupted whilst the drive is running,
for safety reasons the motor switches off automatically, which
means that the unit must be switched on again via the cord / lever
when the power supply is re-established.
4

Maintenance

4.1

Cleaning

Before commencing any maintenance work disconnect the electrical power
supply by pulling out the plug!
Remove any oil and dirt from the shearing plant by means of a dry cloth. Do
not use liquids!
4.2

Service

WARNING!
For safety reasons the portable shearing plant should be sub-
jected to an annual inspection. It is important that the self-tensi-
oning belt is checked periodically, since the functionality of the
patented safety cutout device is dependent on this.
4.3

Lubrication

Lubricate the machine in accordance with the following specifications, sin-
ce a lack of lubrication is the most common source of faults for unsatisfac-
tory shearing results.
4.3.1

Portable shearing plant

Requires no lubrication.

4.3.2 Flexible drive

prior to each period of operation
Oil the flexible drive prior to use, and at least each time the cutters are re-
placed (Diag. 7, pos. a).
10
EVO Shearing Plant – Translation of the original instructions