Siemens SINAMICS S120 Manual page 13

3 DCC Blocks
After importing, check the "XML export/import status display" tab at the bottom of
STARTER, the import should be successfully completed (figure 3-4).
Figure 3-4 "XML export/import status display" tab in STARTER which provides information
when an XML file is imported correctly
Then, in the project tree, the "ExtendedCraneDCC" should appear under the
control unit object. Right click on the "ExtendedCraneDCC" and select "Accept and
compile" (figure 3-5).
Figure 3-5 Using "Accept and compile" option in STARTER to ensure XML file
ExtendedCraneDCC's create procedure is successful
Extended Crane Drive-Based Technology AC
Extended Crane Drive-Based Technology SINAMICS S120
DCC Add-On Description 109767457, V1.2, 09/2019
13