Advertisement
Quick Links
Z-Wave
CO2 Sensor
The PAT12 CO2 sensor uses advanced NDIR (Non Dispersive Infra-Red) detect
technology. The major advantages of NDIR sensors are low life cycle cost and
precise and stable long-term operation.
The PAT12 CO2 sensor is a device that allows you to check the air quality in your
home by detecting and measuring CO2 concentrations.
The PAT12 sensor is easy to use and very convenient for your home. Just set the
sensor on the wall in the rooms you would like to control, and you are ready to go.
Moreover, the PAT12 can be integrated to other Z-Wave certified devices, and
controlled with Philio app "Home Mate 2." You can now protect your family and your
business and make sure that air you are breathing is safe. Set up your PAT12 to send
PAT12-
A/B
regular notifications and take control even when not at home.
This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-
Wave Plus messages to communicate to other security enabled Z-Wave Plus
products.
This device must be used in conjunction with a Security Enable Z-Wave Controller in
order to fully utilize all implemented functions.
The device adopts the Z-WaveTM 500 series chip when your Z-WaveTM network
system is made by Z-WaveTM 500 series devices. This network system has the
following advantages:
The product supports the Over The Air (OTA) feature for the products firmware
upgrade.
Notice:
The PAT12 may exhibit a tolerance addition of 90ppm when first installed. This will get
corrected by the Self Calibration Feature within the first weeks of operation.
Please continue to operate the PAT12 at a condition that was exposed, ambient
reference levels of air at 400 ppm CO2, for at least 7-Days.
Opening external windows can drop the CO2 levels down to 400ppm.
Function Compare A/B
PAT12-A
+/- 75 ppm or 10% of reading, whichever is greater
PAT12-B
+/- 30 ppm or 3% of reading, whichever is greater
1
CO2 Accuracy
Advertisement
Related Manuals for Philio PAT12-A
Summary of Contents for Philio PAT12-A
- Page 1 Moreover, the PAT12 can be integrated to other Z-Wave certified devices, and controlled with Philio app “Home Mate 2.” You can now protect your family and your business and make sure that air you are breathing is safe. Set up your PAT12 to send...
- Page 2 Adding to Z-Wave Network the PAT12 three times within in the event that the 3 seconds to enter inclusion primary controller is This product can be operated in any Z-Wave network with other Z-Wave certified de- mode. lost or otherwise vices from other manufacturers.
-
Page 3: Led Indication
baseline level , the device will unsolicited to send the “ Sensor Multilevel Report ” to Association This machine provides a group of the nodes in the group 1. nodes. Each group can set 5 Nodes. Group 1: Used for returned events. Multilevel Sensor Report Report type: Sensor Type : CO2 (0x11) -
Page 4: Z-Wave Configuration Settings
Before starting the update, please remove the front case of the device otherwise the Supervision None hardware check will fail. Firmware Update Meta Data Highest granted Security Class Let the controller into firmware update mode, and press the front tamper key once to start the update. -
Page 5: Specification
They can take this product for environmental safe recycling. Operating Temperature -10°C ~ 40°C (85% humidity) Philio Technology Corporation 8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 24257, Taiwan Storage Temperature -20 C ~ 60°C www.philio-tech.com... - Page 6 provide reasonable protection against harmful interference in a residential installation. chain, damaging your health and well-being. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful When replacing old appliances with new once, the retailer is legally obligated to take interference to radio communications.