Entering Text; Restoring The Network Settings To Factory Default - Brother DCP-770W Quick Setup Manual

Entering Text

3
Press a or b repeatedly to select a character from the
list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOP
QRSTUVWXYZ0123456789
(space)!"#$%&'()l+,-./:;<=>?@[\]^_`{|}˜
Press or repeatedly to move the cursor.
Note
Making corrections
If you entered an incorrect letter and want to
change it, press or
under the incorrect letter.
Use the a and b keys to change to the correct
letter, then press repeatedly to move the
cursor back to the end of the text.
to position the cursor
For Network Users
Restoring the network
4
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except power cable).
2
Press Menu.
3
Press a or b to choose LAN.
Press OK.
4
Press a or b to choose Factory Reset.
Press OK.
5
Press to select Yes.
6
Press to select Yes.
7
The machine will restart, re-connect cables
once this is complete.
47