Rx Band Filter Response Compensation - Nokia RH-6 Series Rf Description & Troubleshooting

CCS Technical Documentation
The results must be checked against the following limits:
Value
If Rssi 4 and Rssi 7 are within the limits, all other Rssi values are valid, too.
Press Stop in the RX Calibration window and a new window pops up:
Press Yes and the GSM1900 RX Calibration is finished.

RX band filter response compensation

This alignment is necessary to compensate the frequency response of the RX band filters
(SAW filters).
RX band filter response EGSM900
Set operating mode to local mode.
Select
Wait until the RF Controls window pops up.
Select
Select
A window pops up:
Select Yes and the RX Band Filter Response Compensation window pops up.
Issue 1 10/2003
Company Confidential
Typical
Rssi 4 78
Rssi 7 98
Maintenance
Band
Maintenance
Tuning
Copyright © 2003 Nokia Corporation.
Company Confidential
7 - RF Description & Troubleshooting
Limit min. Limit max.
76 81
96 101
Tuning
RF Controls
GSM 900
RX Band Filter
Response Compensation
RH-6
Alt-M
T
F
Alt-M
T
B
Page 45