Nokia RH-6 Series Rf Description & Troubleshooting page 15

CCS Technical Documentation
In RSSI reading click on Read now.
The resulting RSSI level should be – 80dBm +/– 0.5dB in each band.
Measuring RX performance using SNR measurement
Start Phoenix Service Software and open FBUS connection.
Select
Wait until phone information is shown in the lower right corner of the screen.
Set operating mode to local mode.
Select
Wait until the RF Controls window pops up.
Select
Select
Select
Issue 1 10/2003
Company Confidential
Scan Product
Maintenance
Testing
Band
Active unit
Operation mode Burst
RX/TX Channel
Maintenance
Testing
Fast SNR (Radio Button)
Copyright © 2003 Nokia Corporation.
Company Confidential
7 - RF Description & Troubleshooting
Ctrl-R
Alt-M
T
RF Controls F
GSM 900 or GMS1800 or GSM1900
RX
37 or 700 or 661
Alt-M
T
SNR MeasurementM
RH-6
Page 15