NHL-2NA
RX Band Filter Response Compensation
• RF generator needed
• Must be done separately on both bands!
• Start RX Band Filter Response Compensation at EGSM (GSM900), then do RX
Band Filter Response Compensation at GSM1800 band.
• Note: Remember to do RX calibration before doing Rx Band Filter Response Com-
pensation!
• Remember to take jig and cable attenuations into account!
• Select Maintenance => Tuning => Rx band filter response compensation
• Select "Yes" to start tuning with values already saved to the phone
• Select "Manual tuning"
Page 30
¤Nokia Corporation
CCS Technical Documentation
Issue 1 07/02