Nokia RH-6 Series Rf Description & Troubleshooting page 71

CCS Technical Documentation
PC/Phone operation:
Set operating mode to local mode
Select
Wait until the TX IQ Tuning window pops up.
Select
Wait until the RF Controls window pops up.
Connect a Spectrum Analyzer or GSM tester with the option *Narrow Spectrum' to the
RF connector of the phone.
If a spectrum analyzer is used then use the following settings.
Select in the RF controls window:
Select
Select in the TX IQ tuning window:
Select
Press
Issue 1 10/2003
Company Confidential
Maintenance
Maintenance
Center Frequency
Frequency Span
Resolution Bandwidth
Video Bandwidth
Sweep Time
Sweep Type
Detector Type
Reference level
Marker 1
Marker 2
Marker 3
Band GSM 1900
Active UnitTX
Operation ModeBurst
RX/TX Channel 661
TX PA ModeFree
TX Data TypeAll1
Load from Product
Start
Copyright © 2003 Nokia Corporation.
Company Confidential
7 - RF Description & Troubleshooting
Tuning
TX IQ Tuning
Tuning
RF Controls
GSM1900
1880MHz
300 kHz
3 kHz
3 kHz
3 sek.
Clear/Write
Max Peak
35 dBm
1879.93229 MHz
1880 MHz
1880.06771 MHz
RH-6
Alt-M
T
I
Alt-M
T
F
Page 71