In calibration mode DA-11 is powered by external power supply 11-16V DC. In flashing power for the phone can be taken from FPS-8 or external power supply 11-16V DC. DA-11 main electric functions are: • phone recognizing from BTEMP • filters of FBUS signals Issue 1 03/2004 CopyrightNokia. All rights reserved Page 3...
Page 6
RH-23 Company confidential CCS Technical Documentation Product Code DA-11 Docking Station Adapter: 0770587 SA-36 RF Coupler: 0770726 Figure 1: View of DA-11 Docking Adapter Page 4 CopyrightNokia. All rights reserved Issue 1 03/2004...
Page 7
Company confidential RH-23 CCS Technical Documentation Figure 2: RF Coupler SA-36 Issue 1 03/2004 CopyrightNokia. All rights reserved Page 5...
3 Loosen upper block locking screws of the module jig 4 Insert upper block flex assy to the jig and ensure connector on flex pwb is con- nected 5 Tighten screws to keep upper block flex assy in place Page 6 CopyrightNokia. All rights reserved Issue 1 03/2004...
Page 9
If overvoltage protection is triggered, the normal jig operation can be restored by switching OFF the power supply, replacing the fuse (if not OK) and restoring valid power supply. MJ-17 includes over voltage, overcurrent and reverse polarity protection. Issue 1 03/2004 CopyrightNokia. All rights reserved Page 7...
CCS Technical Documentation RJ-14 Soldering Jig RJ-14 Soldering Jig is used for soldering and as a rework jig for WV8 module. Product Code RJ-14 Module Jig: 0770589 Figure 4: View of RJ-14 Page 8 CopyrightNokia. All rights reserved Issue 1 03/2004...
ST-11 and RJ-21 can be ordered separately or as the whole SK-9 PA Rework Kit. Product Codes SK-9 PA Component Rework Kit: 0274819 ST-11 PA Rework Stencil: 0770881 RJ-21 PA Rework Jig: 0770849 Figure 5: View of SK-9 incl. ST-11 (above) and RJ-21 (below) Issue 1 03/2004 CopyrightNokia. All rights reserved Page 9...
SK-5 Rework Kit for FM radio Includes ST-5 Rework Kit and RJ-24 Rework jig. Product codes: SK-5 Rework Kit: 0274507 ST-5 Rework Stencil for FM radio: 0770691 RJ-24 Rework Jig for FM radio: 0770688 Page 10 CopyrightNokia. All rights reserved Issue 1 03/2004...
SS-28 Dome Sheet Assembly Jig SS-28 Dome Sheet Assembly Jig is used for the dome sheet assembling. Product Code SS-28 Dome Sheet Assembly Jig: 0770872 Figure 6: SS-28 Dome Sheet Assembly Jig Issue 1 03/2004 CopyrightNokia. All rights reserved Page 11...
Page 14
RH-23 Company confidential CCS Technical Documentation [This page left intentionally blank.] Page 12 CopyrightNokia. All rights reserved Issue 1 03/2004...
ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A out- put. Product Code ACF-8 Universal Power Supply: 0680032 Figure 3: View of ACF-8 Nokia Corporation. Issue 1 03/2004 Page 15...
SF-11 POS Flash Loading Adapter is used in place of the phone's normal battery during service, to supply a controlled operating voltage. Product Code SF-11 POS Flash Loading Adapter: 0770588 Figure 4: View of SF-11 Nokia Corporation. Page 16 Issue 1 03/2004...
Company confidential RH-23 CCS Technical Documentation FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage. Product Code FLC-2 DC Cable: 0730185 Figure 5: View of FLC-2 Nokia Corporation. Issue 1 03/2004 Page 17...
The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8. Cable length is 2 meters. Product code AXS-4 D9-D9 Service Cable: 0730090 Figure 6: View of AXS-4 Nokia Corporation. Page 18 Issue 1 03/2004...
Company confidential RH-23 CCS Technical Documentation XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4S to SF-11. Product code XCS-1 Service Cable: 0730218 Figure 7: View of XCS-1 Nokia Corporation. Issue 1 03/2004 Page 19...
Caution:Make sure that you have switched off the PC and the printer before making connections! Caution:Do not connect the PKD-1 to the serial port. You may dam age your PKD-1! Product Code SW Security Device PKD-1: 0750018 Figure 8: View of SW Security Device Nokia Corporation. Page 20 Issue 1 03/2004...
FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. Product Code Sales Pack - Europe/Africa 0080541 Sales Pack - APAC 0080542 Sales Pack - US 0080543 Figure 9: View of FLS-4S Nokia Corporation. Issue 1 03/2004 Page 21...
RH-23 Company confidential CCS Technical Documentation PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 to FPS-8. Product Code PCS-1 Power Cable: 0730012 Figure 10: View of PCS-1 Nokia Corporation. Page 22 Issue 1 03/2004...
DAU-9S FBUS Cable The FBUS Cable DAU-9S has a modular connector, and is used with between PC's serial port and, e.g., Module Jig MJ-17. Product Code DAU-9S FBUS Cable: 0730108 Figure 12: View of DAU-9S Nokia Corporation. Page 24 Issue 1 03/2004...
Company confidential RH-23 CCS Technical Documentation SCB-3 DC Cable The DC Cable SCB-3 is used to connect, e.g., JBV-1 to the phone. Product Code SCB-3 DC Cable: 0730114 Figure 13: View of SCB-3 Nokia Corporation. Issue 1 03/2004 Page 25...
Company confidential RH-23 CCS Technical Documentation Printer Cable This cable is used to connect the PC to FPS-8. Product code Printer Cable: 0730029 Figure 15: View of Printer Cable Nokia Corporation. Issue 1 03/2004 Page 27...
RH-23 Company confidential CCS Technical Documentation CA-6UT Service Audio Cable CA-6UT is used for FM radio troubleshooting. Product code: CA-6UT Service Audio Cable: 0730297 Figure 16: View of CA-6UT Nokia Corporation. Page 28 Issue 1 03/2004...