Husqvarna 525DEPS Operator's Manual page 9

• Remove the spark plug cap before you put the
product into storage to make sure that the engine
does not start accidentally.
Safety instructions for maintenance
WARNING:
instructions that follow before you do
maintenance on the product.
• Do only the maintenance and servicing given in
this operator's manual. Let professional servicing
personnel do all other servicing and repairs.
• Regularly do the safety checks, maintenance and
service instructions given in this manual. Regular
maintenance increases the life of the product and
decreases the risk of accidents. Refer to
Maintenance on page 16 for instructions.
• If the safety checks in this operator's manual is
not approved after you do maintenance, speak to
your servicing dealer. We guarantee that there
are professional repairs and servicing available
for your product.
• Obey maintenance requirements given in OSHA
1910.269.
Safety instructions for the cutting
equipment
WARNING:
instructions that follow before you use
the product.
• Only use the guide bar/saw chain combinations
and filing equipment that we recommend. Refer
Accessories on page 26 for instructions.
to
• Use protective gloves when you use or do
maintenance on the saw chain. A saw chain that
does not move can also cause injuries.
• Keep the cutting teeth correctly sharpened. Obey
the instructions and use the recommended file
gauge. A saw chain that is damaged or
incorrectly sharpened increases the risk of
accidents.
• Keep the correct depth gauge setting. Obey the
instructions and use the recommended depth
gauge setting.
1480 - 007 - 15.02.2021
Read the warning
Read the warning
• Make sure that the saw chain has the correct
tension. If the saw chain is not tight against the
guide bar, the saw chain can derail. An incorrect
saw chain tension increases wear on the guide
bar, saw chain and chain drive sprocket. Refer to
To tension the chain on page 23 .
• Do maintenance on the cutting equipment
regularly and keep it correctly lubricated. If the
saw chain is not correctly lubricated, the risk of
wear on the guide bar, saw chain and chain drive
sprocket increases.
Safety instructions for the dielectric
shaft
WARNING:
instructions that follow before you use
the product.
The product is tested to meet OSHA 1910.269 and
ANSI B175.7 standards.
• The product must be used by approved and
qualified personnel only.
• Clean and do the correct servicing on the
dielectric shaft to help keep the electrical
insulation properties.
• Keep the dielectric shaft clean and dry when you
do work around energized electrical power lines.
Oil or dirt decreases the electrical insulation
properties of the dielectric shaft.
• Obey local regulations.
• The tool must be clean, dry, and work correctly
before use.
• Not for live-line work.
• Follow all company procedures.
• Use only approved dielectric bar oil.
Read the warning
9