Husqvarna 525DEPS Operator's Manual page 11

To assemble the shaft
1. Turn the knob to loosen the coupling.
2. Push and hold the release button.
3. Carefully push the shaft into the coupling until
you hear a click. Make sure that the release
button go into the hole in the coupling.
4. Tighten the knob fully.
1480 - 007 - 15.02.2021
To disassemble the shaft
1. Turn the knob 3 turns or more to loosen the
coupling.
2. Push and hold the release button.
3. Hold tight to the end of the shaft segments that
you are to remove.
4. Pull the shaft straight out of the coupling.
To assemble the branch hook
• Use 2 screws to attach the branch hook.
11