Cleaning And Maintenance; General Safety Rules - Electrolux E9BSGLIUFE Spare Parts Diagram

V I C L E A N I N G
MAINTENANCE

1 GENERAL SAFETY RULES

ATTENTION!
Machine maintenance operations must only be
carried out by specialised Technicians provided
with suitable personal protection equipment
(safety shoes, gloves, glasses, overalls, etc.), tools,
utensils and ancillary means.
ATTENTION!
Never operate the machine, removing, modifying
or tampering with the guards, protection or
safety devices.
ATTENTION!
Before carrying out any operation on the
machine, always consult the manual which
gives the correct procedures and contains
important information on safety.
1.1 INTRODUCTION
The machines are provided with electric and/or mechanical
safety devices for protecting workers and the machine itself.
Therefore the user must not remove or tamper with such
devices.
The Manufacturer declines any liability for damage due to
tampering or their non-use.
1.2. PROTECTION DEVICES INSTALLED ON THE
MACHINE
1.2.1 Guards
The guards on the machine are:
- fixed guards (e.g. casings, covers, side panels, etc.), fixed
to the machine and/or frame with screws or quick-release
connectors that can only be removed or opened with tools;
- machine electrical equipment access doors made from
hinged panels openable with tools, with the machine
disconnected from the power supply.
ATTENTION!
Several illustrations in the manual show the
machine, or parts of it, without guards or with
guards removed. This is purely for explanatory
purposes. Do not use the machine without the guards or
with the protection devices deactivated.
34
A N D
1.2.2. SAFETY SIGNS TO BE PLACED ON THE MACHINE
OR NEAR ITS AREA
RISK
1.2.3 CEASED USE
When the appliance is no longer to be used, make it unusable
by removing the power supply wiring.
1.2.4 INSTRUCTIONS FOR USE AND MAINTENANCE
Risks mainly of a mechanical, thermal and electrical nature
are present in the machine.
Where possible the risks have been neutralised:
• directly, by means of adequate design solutions,
• indirectly by using guards, protection and safety devices.
During maintenance several risks remain, as these could not
be eliminated, and must be neutralised by adopting specific
measures and precautions. Do not carry out any checking,
cleaning, repair or maintenance operations on moving parts.
Workers must be informed of the prohibition by means of clearly
visible signs. To guarantee machine efficiency and correct
operation, periodical maintenance must be carried out according
to the instructions given in this manual. In particular, make sure
to periodically check correct operation of all the safety devices
and the insulation of electrical cables, which must be replaced
if damaged.
1.2.5 REASONABLY FORESEEABLE IMPROPER USE
Improper use is any use different from that specified in this
manual. During machine operation, other types of work or activities
deemed improper and that in general can involve risks for the
safety of operators and damage to the appliance are not allowed.
Reasonably foreseeable improper use includes:
• lack of machine maintenance, cleaning and periodical checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators,
specialised technicians and personnel for normal use;
• failure to use suitable accessories (e.g. use of unsuitable
equipment or ladders);
• keeping combustible or flammable materials, or in any case
materials not compatible with or pertinent to the work, near
the machine;
• wrong machine installation;
• climbing on the machine;
• non-compliance with the requirements for correct machine use;
• other actions that give rise to risks not eliminable by the
manufacturer.
sicurezza.
È vietato usare acqua per spegnere
gli incendi (esposto sulle parti
elettriche).
MEANING
BURN HAZARD
RISK OF ELECTRIC SHOCK
DANGER OF CRUSHING
ATTENTION!
Do not remove, tamper with or make illegible
the safety, danger and instruction signs and
labels on the machine.
.