LawnMaster GT1450 Operator's Manual page 14

OPERATION
ADVANCING LINE
NOTE: Trimmer is equipped with an auto-feed head.
Do not bump the head or try to advance the line. This will damage the
trimmer and void the warranty.
• With the trimmer running, release the switch trigger.
• Wait two seconds, and press the switch trigger.
NOTE: Auto feed function works during the starting and stopping of trimmer.
Line will extend approximately 3/16 in. with each stop and start of switch
trigger WHILE NOT TRIMMING until the line reaches the length of the grass
deflector blade.
• It may take up to 10 complete starting and stopping to advance the line.
ROTATING MAIN HANDLE FOR EDGING
NOTE:
The best method of edging is performed with the main handle rotated.
1. Unplug the grass trimmer.
2. Press the rotational lock button and rotate
the main handle clockwise.
3. Release button when main handle has been
rotated 180° to the edging position.
4. Rotate auxiliary handle 180° and snap onto
index channel.
EDGING
(See Figure 15.)
1. The rotating main handle can be used in
combination with the flower guard for edging
sidewalks and walkways. To use the flower
guard, flip down from its stored position.
(See Figure 14.)
①
14
②
Fig.14
Fig.15