SonicWALL NSa Series Getting Started Manual page 16

SS
LAN Bypass LED: When [[[Undefined
variable Products/SonicOS.Product_
Series_NSsp]]] is without power and LED
is off, LAN Bypass state is difficult to
distinguish. It can be either:
l
l
Yellow = bypass active and traffic is
passing while [[[Undefined variable
Products/SonicOS.Product_Series_
NSsp]]] is powered but not available, such
as during reboot.
Green = bypass enabled and traffic can
pass if firewall goes down.
USB SS 3.0 Ports: For configuration,
recovery, re-imaging the [[[Undefined
variable Products/SonicOS.Product_
Series_NSsp]]], and USB WWAN device
support.
Storage LED: Status on internal and
external storage.
l
l
l
Alarm LED:
l
l
Test LED:
l
l
l
l
SonicOS 7 Getting Started Guide for the NSsp 13700 and NSa Series
Bypass disabled (default), traffic cannot
pass
Bypass enabled, power is lost, traffic
can pass
Blinking green = activity
Yellow = storage warning
Off = no activity
Red = high Level alarm (such as fan
failure) or power down requested
Yellow = lower level alarm
Red = power down requested
Yellow = initializing
Blinking yellow = SafeMode/FIPS test
in progress
Off = normal
NSsp 13700 Overview
16