8
Function
1
2
BEKOMAT® 31U IF built-in F
3
Via the inlet line (1) the condensate flows into the
BEKOMAT
(2).
A capacitively functioning sensor (3) continuously
4
registers the filling level and releases a signal to
the electronic interface (output Sen), as soon as
the container is filled.
(See also Chapter "Electrical installation")
The pilot valve (4) is triggered by an external signal
(input Drn). When this signal is available, the valve
4
is activated and the membrane (5) opens the outlet
line (6) to discharge the condensate.
With the reset of the signal, the outlet line is reclosed
5
tightly.
6
®
31U IF and accumulates in the housing
Function
9