Table of Contents
Advertisement
Electrical installation
Note:
Between the terminals and the housing or the condensate connections, there is no galvanic isolation.
The provided 24 VDC voltage must comply with the requirements for protective extra-low voltages (PELV)
in accordance with IEC 60364-4-41.
Tighten the threaded cable connection with a slightly sealing effect.
Electric diagram
14
BEKOMAT® 31U IF built-in F
Advertisement
Table of Contents
Need help?
Do you have a question about the BEKOMAT 31U IF built-in F and is the answer not in the manual?