Table of Contents
Advertisement
Installation
9
Installation
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping
compressed air or through bursting plant components or plant components which
are not secured.
Measures:
•
Do not exceed the maximum operating pressure (see type plate).
•
Only carry out service measures when the system is pressureless.
Use pressure-resistant installation material only.
•
•
The feed pipe must be tubed firmly.
Discharge pipe: short, fixed pressure hose onto pressure-resistant pipe.
•
Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT
Condensate which is not discharged may cause damage to plants and in production
processes.
r
Measures:
•
Condensate drainage which is reliable in performance directly optimises the compressed-air quality.
•
To prevent damage and breakdowns, it is imperative to observe the following:
•
Exact compliance with the specifications of use and with the performance parameters of
the BEKOMAT
•
Exact compliance with the installation- and operation instructions in this manual
•
Regular maintenance and control of the BEKOMAT
in this operating manual
10
®
.
®
, in connection with the case of application (see "Proper use" section)
®
in accordance with the instructions
BEKOMAT® 31U IF built-in F
Advertisement
Table of Contents
