Servicing Midwest Quick Coupling - Dentsply Sirona Midwest Stylus Plus Operating Instructions Manual

8 Maintenance
64
8.3

Servicing Midwest quick coupling

8.3.1 Replacing the halogen lamp of the 6-pin coupling
CAUTION! The lamp can be hot. Risk of burns! Allow the lamp
to cool down.
1. Remove the high-speed handpiece.
A
2.
Insert blunt pick into recessed area on lamp base and slide
lamp out of socket.
3. Remove the defective lamp (A).
IMPORTANT: Do not touch replacement lamp with bare
fingers. Oils from the skin decrease lamp life. Use gloves when
handling lamp.
4. Insert carefully the new lamp with contact pin end first into
lamp socket.
Be sure to orient recessed area on lamp base to face out slot
on coupling. If it is not possible to insert lamp, rotate lamp 180
degrees and try again.
Operating instructions Midwest Stylus Plus / Midwest Tradition
67 27 148 D3673.201.09.01.02