H Ow To Ch A Rg E Th E B At Tery - EMG CY26ABi Instruction Manual

H OW TO R E CHA RG E TH E
BAT T E RY
In a ventilated area, insert the charger connector into the corresponding battery
charging connector, then
the charger into a standard cur-
rent plug a 230V ~ 50Hz.
Do not recharge the battery in
closed and poorly ventilated
places!
Verify that the charger connec-
tor and plug are not damaged.
During charging, the charger
indicator is red; when the bat-
tery is full, the indicator turns
green. The time needed for a
full charge is approximately 6
hours. This may vary conside-
ring the residual charge.
After charging is completed, pull out the charger plug from the socket, then di-
sconnect the charger connector from the bicycle charging hole. Do not leave the
charger connected to the socket for a long time after charging has been completed.
If a smell comes out from the charger during charging, the temperature may have
become too high; please stop charging immediately and send the unit for mainte-
nance.
Use only the charger supplied with the bicycle to avoid damage to the battery and
not to void the warranty.
WA R N I NG
lithium battery, do not replace with incorrect battery type,
danger of explosion.
16