Table of Contents
Advertisement
The bicycle will be delivered inside a box, almost completely assembled.
Be sure to adjust the saddle and handlebar according to your height. Also be sure to
carefully install the pedals in order to avoid problems while using the bike.
It is very important for safety to tighten the threaded fasteners to the correct torque.
In case of conflict between the instructions indicated in this manual and the information
provided by a component manufacturer, please verify with a qualified bicycle mechanic
or customer service operator.
Bolts that are too tight can stretch and deform. Bolts that are too loose can move and
subject to stress. In both ways, it can lead to a sudden failure of the bolt.
Always use a correctly calibrated torque wrench in order to tighten the critical fasteners
on your bicycle.
Carefully follow the torque wrench manufacturer's instructions in order to use it correct-
ly and obtain accurate results.
RECOMME ND E D TO R Q U E O N
M5: 5-6 Nm
M6: 9-10 Nm
M7: 11-12 Nm
M8: 14-15 Nm
Should you have any doubt about the assembly of the bicycle, consult a qualified
bicycle mechanic or a customer service operator at the shop or bike assistance center.
B I KE ASSE M B LY
FIX IN G D E VI CE S
19
Advertisement
Table of Contents
