EMG CY26ABi Instruction Manual page 21

QU E E N VI S UA L CO N T RO L
Make sure you don't have loose fasteners. Raise the front wheel about 10 cm from
the ground, and let it jump on the ground.
Verify that no devices appear loose, checking its sound or at sight.
In case some accessories appear loose, tighten them with care. If you are unsure,
ask those who have more experience to have a check, or ask a professional bike
shop.
Tires and wheels:
make sure the tires are correctly inflated. Get on the bicycle and observe the tire
inflation after applying your weight.
Compare what you see with the appearance of the tires when they are properly
inflated and intervene if necessary, by inflating them.
Spin the wheel slowly and check that there are no cuts in the tire tread and in the
lateral part.
Before using the bicycle, replace any damaged tire.
To check the alignment of the wheels, turn one wheel at a time, then check the
contact between the wheel and the brake and check that there are no lateral oscil-
lations.
Make sure that the saddle and the stem are parallel to the central axis of the bicycle
and securely locked, so that it cannot rotate and lose the alignment position.
Make sure that the handlebar grips are well fixed and in good condition. If not, have
them replaced.
Make sure that the handlebar is well inserted. In case, have it correctly inserted at a
retailer before using the bicycle.
21