Graco Reactor A-XP Series Operation page 19

13. Ground system
a. Reactor: is grounded through power cord. See
page 15.
b. Spray gun: connect whip hose ground wire to
FTS, page 17. Do not disconnect wire or spray
without whip hose.
c. Fluid supply containers: follow your local code.
d. Object being sprayed: follow your local code.
e. Solvent pails used when flushing: follow your
local code. Use only metal pails, which are con-
ductive, placed on a grounded surface. Do not
place pail on a nonconductive surface, such as
paper or cardboard, which interrupts grounding
continuity
f. To maintain grounding continuity when flushing
or relieving pressure, hold a metal part of spray
gun firmly to the side of a grounded metal pail,
then trigger gun.
14. Fill wet-cups
Pump rod and connecting rod move during operation.
Moving parts can cause serious injury such as pinch-
ing or amputation. Keep hands and fingers away from
wet-cups during operation. Shut off pumps before fill-
ing wet-cups.
312407C
Check pump wet-cups daily. Keep filled with Graco
ISO pump oil (217374) to keep air or moisture from
reacting with fluids.
Wet-Cups
Setup
TI11254a
19