Graco Reactor A-XP Series Operation page 15

3. Electrical requirements
See T 1.
ABLE
Installing this equipment requires access to parts
which may cause electric shock or other serious injury
if work is not performed properly. Have a qualified
electrician connect power and ground to main power
switch terminals, see page 15. Be sure your installa-
tion complies with all National, State and Local safety
and fire codes.
Table 1: Electrical Requirements
(kW/Full Load Amps)
Voltage
Part Model (phase)
A-XP SERIES
259060 A-XP2 230V (1)
259061 A-XP2 230V (3)
259062 A-XP2 400V (3)
HT SERIES (Heat Package Only)
259070 HT-6.0 230V (1)
259071 HT-6.0 230V (3)
259072 HT-6.0 400V (3)
259073 HT-10.2 230V (1)
259074 HT-10.2 230V (3)
259075 HT-10.2 400V (3)
259076 HT-15.3 230V (1)
259077 HT-15.3 230V (3)
259078 HT-15.3 400V (3)
* Full load amps with all devices operating at maximum
capabilities. Fuse requirements at various flow rates and
mix chamber sizes may be less.
** Total system watts for all units, using 310 ft (94.6 m)
hose.
4. Connect electrical cord
Power cord is not supplied. See Table 2. Use 5/32
or 4 mm hex allen wrench to make connections.
312407C
Full
Load
Peak System
Amps* Watts**
62 14,540
40 14,540
22 14,540
44 10,340
27 10,340
18 10,340
62 14,540
40 14,540
22 14,540
84 19,640
57 19,640
33 19,640
Table 2: Power Cord Requirements
Part Model
259060 A-XP2
259061 A-XP2
259062 A-XP2
259070 HT-6.0
259071 HT-6.0
259072 HT-6.0
259073 HT-10.2
259074 HT-10.2
259075 HT-10.2
259076 HT-15.3
259077 HT-15.3
259078 HT-15.3
a. 230V, 1 phase: Connect power leads to L1 and
L2. Connect green to ground (GND).
L1
L2
b. 230V, 3 phase: Connect power leads to L1, L2,
and L3. Connect green to ground (GND).
L1
L2
L3
Setup
Cord Specification
2
AWG (mm )
6 (13.3), 2 wire + ground
8 (8.4), 3 wire + ground
10 (5.3), 4 wire + ground
8 (8.4), 2 wire + ground
10 (5.3), 3 wire + ground
12 (3.3), 4 wire + ground
6 (13.3), 2 wire + ground
8 (8.4), 3 wire + ground
10 (5.3), 4 wire + ground
4 (21.2), 2 wire + ground
6 (13.3), 3 wire + ground
8 (8.4), 4 wire + ground
GND
ti2515b
GND
ti3248b
15