H7GP
Nomenclature
Operation
DIP Switch Settings
Set all DIP switches before mounting the Counter to a control panel.
All switches are set toward the display panel before shipping.
H7GP-C/-CD
Switch
Item
3 (O
3 (On right side
g
s de
Input mode
u
ode
from front)
f
f
t)
(
(note 1)
t 1)
4 (On left side
(O
e s de
Counting speed
Cou
g s eed
from front)
f
f
t)
(
(note 1)
t 1)
Operating Modes
Total Counters
Reset input
AC (2-7)
DC (2-5)
Count input
AC (3-7)
DC (3-5)
999999
Display
0
Function
Display side
NPN
Terminal side
PNP
Display side
30 Hz
Terminal side
5 kHz
Time Counters
1. Reset Key
Resets the count value, but will not operate while
the keys are protected.
2. Key Protection Indicator
Lit while the keys are protected. (Reset Key is
disabled.).
3. NPN/PNP DIP Switch
(Count or start with reset)
When the setting has been changed, turned power
off and on to continue. The display will show "0"
when the power is turned back on. See below for
details.
4. Counting Speed DIP Switch (H7GP-C)
Time Range DIP Switch (H7GP-T)
When the setting has been changed, turned power
off and on to continue. The display will show "0"
when the power is turned back on. Refer to DIP
Switch Setting for details.
H7GP-T/-TD
Switch
Item
3 (O
3 (On right side
g
s de
Input mode
u
f
from front)
f
t)
(
(note 1)
t 1)
4 (On left side
Time range
from front)
)
(note 1)
Note: 1. When the setting has been changed, turned power off
and on to continue. The display will show "0" when the
power is turned back on.
2. The decimal point will flash every second when
"99999.9 h" is set.
Reset input
AC (2-7)
DC (2-5)
Count input
AC (3-7)
DC (3-5)
99999.9 h
(see note)
Display
0
Note: Display values are shown for full scale set to 99999.9 h.
H7GP
Function
ode
Display side
NPN
Terminal side
PNP
Display side
99999.9h
(note 2)
Terminal side
99 h 59 m
59 s
5