Common Smm Cli Operations - Fortinet FortiGate-7000E Series System Manual

FortiGate-7060E System Management Modules
Operation
Display current local sensor values
and sensor SDRs or sensor
thresholds for a module. Available
on the passive module.
Set Sensor thresholds

Common SMM CLI operations

The following table lists many of the operations you can perform from the SMM CLI and the commands you use to
perform them. Only a subset of these commands are available on the passive SMM as indicated below. Also, the
<slot> option is not available on the passive SMM.
Action
Log into the CLI.
Log out of the CLI.
Available on the
passive module.
Display all
commands.
Available on the
passive module.
Display information
about all SMC
firmware in the
chassis.
Display SMC device
ID, Build
Date/Number, SMC
firmware
information, address
info, entity map for
the device in the slot.
Available on the
passive module.
Switching active
SMM. The active
FortiGate-7060E 6.4.2 System Guide
SMC CLI Commands
sensor <slot>
sensor_thresholds <slot>
N/A
SMC CLI Commands
Ctrl-R
exit (followed by Ctrl-R)
help
info
info <slot>
smm_switch
Fortinet Technologies Inc.
IPMI Commands
sensor
sensor hexlist
sdr list
sdr elist
-v sdr list
( -v required when using the Windows
command prompt)
sensor thres help
(use this command to display online help
for setting sensor thresholds)
IPMI Commands
N/A
N/A
help
mc info
N/A
N/A
58