Left And Right Cable Management Brackets; Front Cable Management Brackets (Fim-7910E And Fim-7920E Only) - Fortinet FortiGate-7000E Series System Manual

FortiGate-7060E hardware assembly and rack mounting

Left and right cable management brackets

You can optionally install the left and right cable management brackets to help manage the network cables connected
to FIM modules installed in the FortiGate-7060E. Install the left and right cable management brackets by attaching
them to the left and right front mounting brackets.
Installing FortiGate-7060E optional accessories
M4x8 flat-head
screws
M4x8 large head
pan head screws
Left cable
management
bracket
Front cable
management
brackets
(FIM-7910E/FIM-7920E only)

Front cable management brackets (FIM-7910E and FIM-7920E only)

These front cable management brackets are not included with the FortiGate-7060E package. Fortinet ships a front
cable management bracket with each FIM-7910E and FIM-7920E module. These brackets help support the relatively
large CFP2 transceivers used with FIM-7910E modules and QSFP28 transceivers used with FIM-7920E modules.
If you decide to use one or two front cable management brackets, install them by attaching them to the left and right
cable management brackets.
FortiGate-7060E 6.4.2 System Guide
Front mounting
bracket
Power cord
clamps
Right cable
management
bracket
Front mounting
M4x8 large head
pan head screws
Fortinet Technologies Inc.
M4x8 flat-head
screws
bracket
25