Replacing The Sensor Pc Board - NAMCO CASINO WINNER Operator's Manual

8-6-4

Replacing the Sensor PC Board

1. Switch the power to the machine OFF.
2. Unlock and open the Rear Door.
3. Open the Control Board Assy.
4. Remove 2off cap screw (M3x6), disconnect the 5way, 3way, 2way
connectors, and remove the Sensor PC Board.
5. Reassemble in reverse order.
(see 8-6-3 page 131)
5-pin connector
Sensor PC Board
Cap screw (M3 x 6) x 2
Page 136
3-pin connector
2-pin connector