NAMCO CASINO WINNER Operator's Manual page 53

3. Loosen the two cap screws (M4x10), and Remove the Shutter Guide 3.
To adjust the height of the front edge B, remove the two flange socket screws (M4 x10).
• When removing the two flange socket bolts (M4 x 10), be sure to support the front
edge B with a hand, and take care not to drop the screws.
•
The height of the front edge B can be increased or decreased by 0.5 mm by
changing the holes used for installing the flange socket bolts (M4x10) by one
position.
•
When installing two flange socket bolts (M4 x 10), be sure to insert them into the
holes that are at equal distances from the center.
Cap screw (M)
(M4 x 10) x 2
Front edge B
13mmx6=78mm
Flange socket bolt
(M4 x 10) x 2
Front edge B
Page 53
Shutter guide 3
13mmx6=78mm