VERITAS NetBackup 5330 Appliance Product Description page 9

NetBackup 5330 Appliance system features (continued)
Table 1-1
Feature
High availability
Easy management
RAID levels
Fibre Channel support
Rear panel ports
See "NetBackup 5330 Appliance compute node disk drive configurations"
on page 11.
See "NetBackup 5330 Appliance compute node disk drive LED descriptions"
on page 12.
See "NetBackup 5330 Appliance compute node control panel information"
on page 13.
NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features
Description
Supports redundant hot-swappable disks and power
modules.
Provides separate out-of-band management network
interfaces. You can remotely turn on, turn off, and reset
appliances through the network.
Supports the SNMP traps and automatically reports alarms.
Reports disk information through the out-of-band
management channel.
RAID1 (striping and mirroring) and RAID6 (block level
striping with double distributed parity) are used as follows:
NetBackup 5330 compute node system disks: RAID1
■
Storage shelf data storage disks: RAID6
■
The NetBackup 5330 compute node can be ordered with
two, three, five, or six Fibre Channel (FC) HBA cards
already installed. Each card includes two standard Fibre
Channel ports. If less than six FC HBA cards are ordered,
a 10 Gb Ethernet card with two standard ports can be
ordered. The compute node uses the QLE2562, a QLogic
8 Gb FC PCIe dual port adapter.
One 1 Gb/s IPMI remote network port
One VGA port
Four 1 GbE network ports, with an RJ-45 connector, and
link and activity LEDs. Two of the ports are reserved for
private networks.
Two 10 GbE network ports, with Small Form-factor
Pluggable (SFP) modules, and link and activity LEDs.
See "About the NetBackup 5330 Appliance compute node
rear panel" on page 14.
9