Setup/Startup
7.
Press and release tape application
button to start calibration.
8.
Move TapeLazer forward. Keep guide
on steel tape.
9.
Stop when guide aligns with 25 ft mark
on steel tape (a total traveled distance of
24 ft.), or to whatever distance you
entered on the screen.
22
10. Press and release tape application
button to complete calibration.
NOTE: Calibration is NOT complete when
the exclamation symbol
NOTE: Calibration is finished when the check
mark symbol
is displayed.
11. Calibration is now complete.
is displayed.
3A8108A