Headless Mode; One Key Reverse - ZERO-X swift+ User Manual

9.0

HEADLESS MODE

When headless mode is enabled, the drone will move in the direction that
the remote controller stick is pressed, regardless of its orientation. This
makes it easy to bring the drone home when it is far away from you.
To ensure headless mode works well, please use the correct take off
position. The camera of the drone must point in the intended direction of
flight; the back of the drone should be facing the pilot. See below
instructions.
1. Press the headless mode button on the
controller (shown in the diagram to the
right). The remote control will beep
once indicating that headless mode has
been enabled. To stop headless mode,
press the headless mode button again;
the controller will beep again.
(Fig 6)
Forward
Backward
The correct take off
position.
10.0

ONE KEY REVERSE

1. To ensure One key reverse works well,
please ensure correct take off position as
mentioned in section 9.0 (Fig 6 & 7).
2. While the drone is in flight, press the
reverse button on the remote control,
the controller will beep once and the
drone will fly in reverse.
3. Press the reverse button again to cancel
or push the right control stick in any direction to stop this function.
NOTE:
It is highly recommended that you push the reverse button only when you
are aware that it is safe to reverse.
(Fig 7)
Backward
Operator
The incorrect take off
position.
Forward
17