Timer Mode - Vivotek CaMate Series User Manual

Timer mode

There is an embedded system clcok on CaMate devices. The Timer mode allows the configuration of
periodical ON/OFF time to control LED automatically. However, since there is no battery in CaMate,
the system Clock will reset to default setting when powered down. (If you need to implement a
battery to sustain the system clock during power‐off, please contact your sales representative for
customization service)
Light sensor mode
In the Light sensor mode, the LED is directly controlled by the light sensor status. If the Ambient Light
is lower than the Trigger Level, LED turns ON. If higher than the Trigger level, the LED turns OFF.
Fade in/out
The Fade in/out control defines the LED ON/OFF behavior. If the Fade in/out function is disabled, the
LED is turned ON or OFF immediately. When the Fade in/out is set to FAST, the LED fades in or out in 1
second, and 3 seconds if set to SLOW. Fade in/out can avoid sudden LED ON/OFF, which may cause the
occurrence of over‐exposure or under‐exposure on camera image. The sudden ON/OFF will also cause
discomfort for human eyes when using the visible light CaMate, such as the w5 series.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
10