Storage - Kyocera TJEP ST-15/50 GAS Safety And Operation Instructions

• The employer and the operator are responsible for
assuring that the gas tool is kept in safe working
order. Furthermore, only authorized TJEP service
personnel or TJEP distributors shall repair the gas
tool and must use parts or accessories that are
supplied or recommended by Kyocera Unimerco
Fastening.
• Keep the gas tool in clean condition at all times.
Wipe off grease or oil with dry clean cloth to
prevent accidental drop of the gas tool. Avoid
any use of solvent base cleaner to clean the gas
tool, as certain solvent will damage or weaken the
composite parts of the tool.
• NEVER use a tool if there is any doubt.
Lubrication and cleaning
• Please refer to:
www.tjep.eu/cleaning-instructions-gas
Cold weather
• It is not suggested to use the gas tool at tempera-
tures below –7°C (19°F). The cold weather will
decrease the combustion efficiency and also the
battery performance.

Storage

• When not in use for an extended period, apply
a thin coat of lubricant to the steel parts to avoid
rust. Do not store the gas tool in a cold weather
environment. When not in use, the nailer should
be stored in a warm and dry place. Keep out of
childrens reach.7
English
67